Content Preview

NACE CIP Level 1 Standards Exam 2025 Questions and Answers ASTM D3276 - ....ANSWER☑️☑️...-Standard Guide for Painting Inspectors. States that the minimum surface temperature for coating is usually 40F, max is 125F. ISO 8501 St3 - ....ANSWER☑️☑️...-Very Thorough Hand and Power Tool Cleaning. Same as for St2, but the surface shall be treated much more thoroughly to give a metallic sheen arising from the metallic substrate. NACE 4 (SSPC-SP7) - ....ANSWER☑️☑️...-Brush off Cleaning. Same cleanliness as NACE 1 (SSPC-SP5) and tightly adherent mill scale, rust, and coating may remain on the surface. SSPC-SP3 - ....ANSWER☑️☑️...-Power Tool Cleaning ISO 8501 Sa 2.5 - ....ANSWER☑️☑️...-Very Thorough Blast Cleaning NACE 8 (SSPC-SP 14) - ....ANSWER☑️☑️...-Industrial Blast Cleaning. Lightly adherent mill scale, rust, and coating residue are permitted to remain on 10% of each unit area of the surface. NACE 8 (SSPC-SP 14) Lightly adherent mill scale, rust, and coating residue are permitted to remain on ____ of each unit area of the surface. - ....ANSWER☑️☑️...10 SSPC-VIS 3 - ....ANSWER☑️☑️...-Visual Guide for Rust Grades. Rust Grades A-D (A is the worse) FOR STUDY PURPOSES ONLY ©️ 2025 ALL RIGHTS RESERVED 1